Bagfilter - HS55


HS55 Serie Bag Filter is used as a prefilter or fine filter in air conditioning systems (HVAC) and for industries.


The filter media, made from both polymer and glass fibres, are assembled in a robust plastic, steel or aluminium frame. The aluminium frame is a new introduction for AFPRO filters. Its advantage is its great stiffness and the detail or the finish level. The combination of the new aluminium frames  andthe aerodynamic finishing strips, make simple the installation. Futhermore,  filters will have a lower resistance throughout their lifetime.


The filters are available in filter classes ISO Coarse 80% in compliance with ISO 16890


Application : HVAC, industry
Frame : Galvanized steel /Aluminium
Medium : Synthetic
Gasket : Optional continuous poured gasket
Filter class according to EN 779:2012 : M5
Filter class according to ISO 16890 : ISO Coarse 80%
Maximum final presssure drop : 450Pa
Maximum temperature : 70 °C
Maximum relative humidity : 90%


  • Ensure that the filter is fitted correctly: Suction side – clean air side
  • Filter should be correctly installed: no leaks
  • Gaskets should be completely undamaged
  • Filter should be secured at four points
  • Make sure that the filter medium is not folded double
  • Take care to avoid damaging the filter during installation
  • System should be run in for several hours to achieve the desired result
  • Filter installation records; note the date, type and initial resistance
2 tuotetta löytyi
Bagfilter dim. 287x592x635 mm.
Tuotekoodi HS55C3-6
Zakkenfilters met metalen frame/Normal/M5 ISO Coarse 80%
Bagfilter dim. 592x592x360 mm.
Tuotekoodi HS55A6-3
Zakkenfilters met metalen frame/Normal/M5 ISO Coarse 80%